q Mold Electrolytic Ultrasonic Cleaning Machine - Granbo Mall

Mold electrolytic ultrasonic cleaning machine

Mold electrolytic ultrasonic cleaning machine
Mold electrolytic ultrasonic cleaning machine

Electrolytic mold ultrasonic cleaning machine features.

Efficient removal of gas, carbide, sulfide, mold release agent, resin residue, color powder residue from mold surface and mold cavities ….. and other tenacious dirt.

Non-corrosive, does not hurt the mold, mold kernel body, save time, energy, cost, safety, efficiency, improve product yield.

Electrolytic mold ultrasonic cleaning machine’s scope of application.

All kinds of injection molding, blow molding, stamping and other precision molds.

Hardware Mould
Hardware Mould

The role and principle of electrolytic mold ultrasonic cleaning machine.

Electrolytic mold ultrasonic cleaning machine is mainly with the mold or to clean the workpiece as the cathode (into the cleaning frame can be), and will have a system type electrode rod as the anode. The use of electrolytic water effect, in the anode to produce oxygen, the cathode to produce hydrogen gas. In the process of operation, a large amount of hydrogen gas is generated on the surface of the workpiece, so that the dirt is quickly decomposed from the surface of the workpiece and stripped; at the same time, the cavitation effect of ultrasonic waves is used to make numerous small bubbles and objects to impact each other. The dirt on the workpiece is impacted and blasted, so that the dirt is stripped automatically. At the same time, the use of special cleaning solution by the full chemical reaction makes the dirt quickly decomposed. In this way, even the difficult to clean parts such as the internal grooves, slots, corners, holes, holes, bite flowers and other complex parts of the mold, will be cleaned cleanly, the mold from inside to outside to show a brilliant metallic luster. The cleaned molds are rinsed with water and then soaked with a special water-based rust inhibitor for steel. This anti-rust agent can quickly remove the water from the surface of the mold and form a protection on the surface of the mold. After air-drying, it can be stored or reprocessed. Re-production will not produce carbide adhering to the mold.

Cylinder
Cylinder

Electrolytic mold ultrasonic cleaning machine process introduction.

Electrolytic mold ultrasonic cleaning machine has two sets of processes in it, there may be soft together with, there may be separate washing, let’s put it this way, whether it is soft together, or separate, the principle is unchanged.

Process one: the use of electric ion movement, stripping the dirt attached to the surface of the mold, so that the dirt in the process of electric ion movement quickly loosened and fall off.

Process two: the use of ultrasonic vibration, prompting the dirt in the process of electric ion movement, more quickly off, combined with a special solution by the full chemical effect makes the dirt quickly decomposed, effectively remove the mold on the oil, rust, sulfide, gas gas and carbon deposits and other dirt.

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top