If the ultrasonic cleaning tank is rusted, it needs to be dealt with in a timely manner, otherwise the rust may affect the cleaning effect and even cause damage to the cleaning tank. Here are some methods to deal with rust in the cleaning tank:
- Use acidic cleaning agents: Acidic cleaning agents can effectively remove rust from the surface of the cleaning tank. Apply the acidic cleaning agent to the rusted area, and then use a soft brush to gently scrub. After cleaning, rinse with clean water and dry with a cloth.
- Mechanical treatment: Mechanical methods such as sandpaper, wire brushes, and steel balls can be used to remove rust from the surface of the cleaning tank. However, it should be noted that the mechanical treatment process may cause scratches or damage to the surface of the cleaning tank, so it should be done carefully.
- Electrochemical treatment: Electrochemical methods can also be used to remove rust from the surface of the cleaning tank. The cleaning tank is used as the anode and placed in an electrolytic tank containing a suitable amount of electrolyte. After being electrified, the rust will react with the ions in the electrolyte and be removed. After cleaning, rinse with clean water.
It should be noted that the reason for the rust in the cleaning tank is usually due to the damage of the coating on the surface of the cleaning tank or the corrosion of the material of the cleaning tank caused by long-term use. Therefore, in daily use, attention should be paid to the maintenance of the cleaning tank, avoid residue of cleaning solution in the tank, and replace the cleaning solution and the coating of the cleaning tank in a timely manner.