What cleaning agent is generally used to clean the hardware parts with good results?

With the development of manufacturing industry, the cleanliness of various parts is becoming more and more demanding. Similar to various bearings, cylinders, auto parts, complex structure, processing will be attached to a large amount of oil. If you rely on traditional cleaning methods, it is difficult to achieve satisfactory cleanliness standards, with the emergence of hardware parts ultrasonic cleaning machine, this problem is solved. Hardware ultrasonic cleaning machine using cavitation to generate high-frequency vibration, so that the water molecules continue to explode to form energy, can quickly decompose the hardware surface oil.

Industrial parts cleaning
Industrial parts cleaning

The current ultrasonic cleaning equipment has a heating function, in high temperature conditions easier to quickly remove the oil on the surface of the hardware. The use of ultrasonic cleaning agent ultrasonic cleaning equipment cleaning effect will be better and efficiency will be faster. Degreasing agent can penetrate into the grease, accelerate the destruction of the molecular structure of grease, so that it dissolves.

At present, hardware cleaning generally uses two types of cleaning agents

1, water-based cleaning agent: ultrasonic cleaning machine using water-based cleaning agent, cleaning and decontamination ability, the hardware parts surface damage is small, negligible. Low cost, easy to use, ultrasonic equipment requires a heating function. But the high precision requirements of hardware parts need to be rinsed several times, drying requires special equipment.

2, organic solvent-based cleaning agents: in the field of industrial washing and cleaning commonly used non-flammable volatile solvents are mainly fluorine, chlorine two major categories, the traditional fluorine solvents such as: F113 and other serious damage to the atmosphere, the state has legislation to prohibit the use; traditional chlorine-containing cleaning agents including methylene chloride, trichloroethylene, trichloroethane, tetrachloroethylene, etc. due to the serious impact on human health in the process of use is restricted, and This type of cleaning agent, which overcomes the traditional type of solvent to the environment and human health hazards, in line with the RoHS directive, is a substitute for the traditional cleaning constant agent.

Cleaning advantages

1、Super cleaning ability: It has good chemical stability and has no obvious effect on most plastics, rubber and other polymer compounds. The cleaning performance is comparable to CFC-113 and trichloroethylene, and it can easily clean microporous products, and has stronger cleaning ability for metal parts.

2. No need to change equipment: Its characteristics and use method are exactly the same as trichloroethylene, so there is almost no need to change equipment, only need to adjust the steaming temperature and it can be used.

3. Not easy to burn: It is not easy to ignite with open flame at room temperature, so there is no danger of fire during the cleaning process, and it is safe to use.

Cleaning Video

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top